Spectrum Pivot Premier Workstation Assembly Instructions Manual Download Page 6

Page: 6 / 9

0193081 Page 6 of 9

Do not allow the legs to contact the floor until

the unit is completely flipped over. Excessive

side-loading of the legs could cause damage.

X 4

Note: If you ordered your Pivot Premier with any accessories, proceed

with the instructions included with the accessory to install.

CPU Sling - 38982

Keyboard Tray - 55496

Undermount Rack Cabinet - 95036

Flip upright

Connect power

Install worksurface accessories

Install configured accessories

Undermount AV Channel

2” Grommet

X 2

Summary of Contents for Pivot Premier Workstation

Page 3: ...HMS 4 req d 1 4 External tooth star washer 4 req d Electric leg assembly X 4 3 4 1 4 External tooth star washer 2 req d on end M6 x 1 x 12mm PHMS 2 req d on end 1 4 20 Keps nut 4 req d 1 4 20 x 1 2 PHMS 4 req d Install electric leg assemblies Install casters 3 Caster ...

Page 4: ...secure cords AC plug AC DC 2 A1 A2 1 Control box Leg 1 Leg 2 Control button Control button 8 x 1 2 PHSM To Control Box Note Control button can be installed on left or right side of workstation Connect power and test leg motion Connect cords to control box Install control button under worksurface ...

Page 5: ...anel 8 32 x 3 8 PHMS 14 x 7 8 PHSM 4 per panel 8 32 x 3 8 PHMS Cord channel Modesty panel X 2 X 2 3 4 Wire loom clip Note Be sure to provide enough slack in the cords for a fully extended worksurface 3 worksurface slots Install corner panels Install modesty panel Install cord channel 8 32 Keps nut 8 32 Keps nut ...

Page 6: ... legs could cause damage X 4 Note If you ordered your Pivot Premier with any accessories proceed with the instructions included with the accessory to install CPU Sling 38982 Keyboard Tray 55496 Undermount Rack Cabinet 95036 Flip upright Connect power Install worksurface accessories Install configured accessories Undermount AV Channel 2 Grommet X 2 ...