background image

Figure 3

2.  Attach Shelf Brackets to Lectern

Figure 2A

1.  Remove the instructor-side door and audience-side panel.

2.  Extend and lock each folding shelf bracket into the horizontal 

position.  

Figure 2A

.

3.  Align and attach each bracket to the side of the lectern using:

4.  Tighten all screws securely.

5.  Install 2” grommet in shelf.

Shelf bracket

8-32 x 1” PHMS

8-32 Keps nut

(use 11/32” wrench)

3/16” Flat steel 

washer

Laminate side panel

3/16” drilled hole 

from Figure 1B

Figure 2B

Metal side panels

Figure 2A

Laminate side panels

Figure 2B 

(

a 2nd person 

to assist may be required)

(4) 8-32 x 1/2” PH Thread-

cutting screws

(4) 8-32 x 1” PHMS

(4) 3/16” Flat steel washers

(4) 8-32 Keps nuts

Metal side 

panel

0120368R2 Page 2 of 2

 

925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729  /  800-235-1262  /  715-723-6750  /  WWW.SPECTRUMFURNITURE.COM

© 2016 Spectrum Industries Inc., All rights reserved.

3.  Operation

The shelf will automatically lock into place when lifted into the horizontal 

position with the levers released.  

Figure 3

.  To lower or flip-up the shelf, 

press and hold the levers under each folding shelf bracket at the same 

time while slowly lowering or raising the shelf.  Do not exceed a maximum 

of 35 lb of weight on the shelf.  Do not move the lectern while the shelf is 

in the horizontal position.

Note:  Power and communication wiring for document cameras, laptop 

computers, and / or projectors placed on the flip-up shelf should be routed 

on top of the audience-side of the shelf.  Use of the shelf grommet hole for 

wiring will result in pinching of the cords when the shelf is folded.

CAUTION

Keep clear of pinch points during shelf movement.  

Do not exceed 35 lbs [15.9 kg] of weight on shelf.

Release lever 

(press here)

Folding shelf 

bracket

8-32 screws

(2 required per 

bracket)

Flip-up shelf 

assembly

2” Grommet

Reviews: