•
Once the knob has been screwed in, mount to the top of the light stand and screw the knob to
tighten. You will know the flexible goose neck has been mounted correctly if it sits perfectly on the
stand with a small part of silver showing, and the goose neck will not wobble
Step 4 – turning the ring light on
•
Plug the ring light into a 240V AC outlet and hold down the white button on the left until the light
turns on
•
You can twist the dimmer knob to control the strength of the light to suit. You can also twist the
temperature knob to change between 3200k orange/yellow light, or to 5600k which is a more
blueish white and is closer to daylight.
Step 5 – setting up the camera bracket and mirror:
•
The camera bracket has a small square screw at the bottom which needs to be loosed to give
enough clearance to slide into the bottom of the inside of the ring light
