Adjustable CPU Sling
#95500
Assembly Instructions:
042023XR9 Page 1 of 2
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding damages or if you have any questions, please call 1-800-235-
1262.
A. Determine the height and width required for your CPU.
B. Adjust the CPU Sling to the height and width of your CPU using the three adjustment holes and attach the
corner brackets to the CPU sling using the 1/4-20 x 3/8" Truss Head Machine screws and 1/4-20 Locknuts as
shown in
Figure 1
. The screws install from the inside with the locknuts on the outside. Note the positions of the
corner brackets for the top and bottom sides of the CPU sling
(Figure 1A.)
1. ASSEMBLING & ADJUSTING CPU SLING
(4) 026547
1/4-20 x 1-1/2 PHMS
Tools Required:
Phillips head screwdriver
7/16" wrench
Drill with an 1/8" bit (for desks without threaded inserts
)
(4) 026017
1/4-20 x 1/2
PHMS
(1) 042110
2" x 2" x 1" Shim
(1) 042019
Leg Bracket
(1) 042139
Drill template
(6) 041943
1/4-20 Locknut
(4) 021605
#10 x 1-3/4 PHSM
(4) 026057
#10 x 3/4 PHSM
(2) 044890
1 x .275 ID x .5
OD Nylon Spacer
(7) 042025
1/4-20 x 3/8
THMS
Figure 1
1/4-20 x 3/8" THMS
Bottom
Locknut
Corner Bracket
Top Side
Corner Bracket
Figure 1A
(2) 042021
Corner Brackets
These are used with 48" 60" and 72" desks
