0193055 Page 2 of 5
Figure 1
Attach frames to worksurface
1. Place the worksurface face-down onto a non-abrasive surface.
2. The frame with the assembled rack rails will go on the concave side of
the worksurface. The frame without the rails goes on the convex side.
3. Orient and attach each frame to the worksurface as shown with (2) #14
x 7/8” PHSM screws. Note the flanges face inward.
Figure 1
.
1
Worksurface
Frame
#14 x 7/8”
PHSM
Attach base panel to frames
1. Align the base panel between the frames and
secure with (4) #8 x 3/8” PHSM screws.
Figure 2
.
2
Figure 2
Flange
Flange
#8 x 3/8”
PHSM
X4
(1) Bottom panel
Frame
with rack rails
Concave
edge
X4
#14 x 7/8”
PHSM
