X 12
0191401R2 Page 3 of 4
1. Place devices into bays with the charge plug accessible on top or front.
Figure 4
.
2. With power cord unplugged and power switched OFF, plug chargers
into outlets.
3. Place chargers and excess cords behind power strip under devices.
Figure 4
CAUTION
While the rubber feet on the bottom of the module prevent scratching
of surfaces the module is placed on, screw heads protruding under the
unit can still possibly scratch these surfaces in some circumstances.
Place the module on a level surface using all 4 rubber feet. Do not
drag or slide the module across tables or worksurfaces. Use caution
when moving. Always remove all devices to reduce weight, and unplug
power strip prior to moving.
Device
Removal:
1. Press and hold the locking tab and slide the divider forward.
2. Lift divider out of slot.
Figure 5
.
Figure 5
Installation:
1. Insert divider into slot.
2. Slide back and ‘click’ into place.
Locking
tab
Dividers can be easily reconfigured for different devices if needed.
2
1
Installing devices
Dividers
