Assembly Instructions
X 2
0191401R2 Page 1 of 4
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Mobile Device Module
55506
(2) 0145039
Bar support
B-side
(with slots)
(4) 056284
8-32 Wing nut
(2) 0142528
Bar support
(with threaded
weld studs)
The Device Charging Module can store and charge up to
12 devices (most Chromebooks, tablets, or notebooks).
(1) Mobile device module
55506-H0 - no power
55506-HA - w/ AC power strip (12 outlets)
55506-HC - w/ (2) 6-port USB chargers
Assembled bars
Figure 1
Bar support B-side
(with slots)
Bar support
(with threaded weld studs)
Tab
Tab
8-32 Wing nut
(2 per assembly)
1
Installing module into cart or Techcenter
(skip to p.3 for stand-alone module)
1. The bars should be assembled with the tabs facing away from each
other as shown in
Figure 1
.
2. Loosen the (2) wing nuts slightly.
3. Repeat for the 2nd set of bars.
