Figure 2A
Figure 2B
Tools
Required
0109742R3 Page 2 of 3
Phillips
screwdriver
Note: On
42”H lecterns
, the upper bumper
will be installed in the 2nd hole from the top.
Note: On
36”H lecterns
, the upper
bumper will be installed in the top hole.
Recessed
bumper
#8 x 5/8”
PHSM screw
Recessed
bumper
#8 x 5/8”
PHSM screw
Recessed
bumper
#8 x 5/8”
PHSM screw
Recessed
bumper
#8 x 5/8”
PHSM screw
Locking
door
Locking
door
Right
side panel
Right
side panel
2. Install recessed bumpers
1. With the door closed, remove the (2) existing #8 x 5/8” PHM screws
from the right side panel. See
Figure 2A
for 36”H lecterns, see
Figure 2B
for 42”H lecterns.
2. Install a recessed bumper into each open hole location with a #8 x
5/8” PHM screw.
3. Tighten screws securely, but do not overtighten.
