background image

For customer support, or to place an order, call Spectrum 
Technologies at (800)248-8873 or (815)436-4440 between 7:30 
am and 5:30 p.m. CST, FAX at (815)436-4460,  
or E-mail at [email protected]

 

Spectrum Technologies, Inc  

3600 Thayer Court 

Aurora, IL 60504 

www.specmeters.com 

Thank you for purchasing a 3661U USB to 3.5mm Stereo Plug 
Cable.  The cable is designed to connect Spectrum Technologies 
WatchDog and FieldScout devices to your PC.  Read this manual 
thoroughly in order to get effective performance from your cable. 

Before You Plug It In 

If possible, ensure your PC is connected to the Internet 
when plugging in the cable for the first time.  If it is 
connected, then plug in the cable, and the appropriate 
driver will be downloaded and installed. 
 
If your PC cannot be connected to the Internet, then you 
must use an Internet-connected PC to download the 
appropriate driver from  
http://www.ftdichip.com/Drivers/VCP.htm 
Copy the downloaded file to a flash drive, and move it to 
your PC. 
 
The link to the driver is also provided on the Software 
Updates page at www.specmeters.com.  From the top 
banner, choose “Support”, “Software Updates” on the right, 
then “USB Software and Driver Updates”.  Follow the link 
for the 3661U Driver near the top of the page.  On the FTDI 
Chip website, choose the driver from the table depending 
on your operating system. Download the driver file. 
 
Extract the zipped files and double-click to run the install. 
Once installed, you can delete the installation program. 

Reviews: