background image

maximum readings.  Press and hold “RESET” for at least 1 sec-
ond to reset the minimum and maximum values. 
 

Alarm 

An audible alarm can sound when CO

2

 concentration exceeds 

user-set limits.  It beeps and the fan icon displays on the LCD 
when the CO

2

 level goes over the upper limit.  The sound can be 

stopped by pressing any button. 
 

Setup 

In normal mode, hold down the SET button for at least 1 second 
to enter setup mode.  To exit setup, press the ESC button. 
 
P1.0 Set CO

2

 Alarm 

When entering setup mode, “CO

2

” and “P1.0” are displayed on 

the LCD. Press SET again to enter “P1.1” to set upper limit for 
the GOOD indicator on the LCD.  Press “LOG

S

”  to increase or 

“MIN/MAX

T

” to decrease the value.   

 
Press SET again to enter “P1.2” to set the CO

2

 alarm lower limit 

(when the level drops below this, the alarm will automatically 
stop). The current value will be blinking on  the LCD.  Press 
“LOG

S

”  to increase or “MIN/MAX

T

” to decrease the value.  

 
Press SET again to enter “P1.3” to set the CO

2

 alarm upper limit 

(exceeding this triggers the alarm). The current value will be 
blinking on  the LCD.  Press “LOG

S

”  to increase or “MIN/MAX

T

” to decrease the value (in a plant growth environment, this 

should probably be set as high as possible (5000) to effectively 
disable the alarm).  Press SET to save the values, or ESC to exit 
without saving. 
 
P2.0 Set Temperature Units 
From the P1.0 display, press “LOG

S

”  to change to the P2.0 

screen.  Press SET to enter “P2.1” to set the temperature units.  
The current units, “°C” or “°F”, will be displayed on the lower mid-
dle area of the LCD.  Press “LOG

S

”  or “MIN/MAX

T

” to switch 

between “°C” and “°F”.  Press the SET button to save the setting, 
or ESC to exit without saving. 
  
P3.0 Real Time Clock 
From the P1.0 display, press “LOG

S

”  twice to change to the 

Summary of Contents for 3611A













Reviews: