Sling
bracket
0192113 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2020 Spectrum Industries Inc., All rights reserved.
2. Attach straps
2. Attach straps
1. Thread the (3) straps through the slots in the sling bracket
and base as shown in
Figure 2
with the tails hanging down.
2. Thread each strap through the buckles as shown.
Figure 2
CPU tower
Strap / buckle
assembly
1. Slide the base to the widest position and carefully place the CPU
tower into the sling.
Figure 3.
2. Slide the base tight against the tower and tighten the two wing nuts.
3. Position all (3) buckles at the same height.
4. Tighten the straps by pulling on tails until the CPU tower and base
are level.
3. Install CPU tower
3. Install CPU tower
Figure 3
Buckle
Tails
CPU Sling
Sling
base
1/4-20
Wing nut
(2 required)
Sling
base
