6
Note: If the station is going to be permanently located at the measurement site, it is recommended
that the mounting pole be installed in the ground before attaching any components.
Assembly
Attaching the Solar Panel
1. Align the Angle Bracket with the two
solar panel openings on the back.
3. Attach and tighten both bolts to the solar
panel and flange nuts.
2. Place the bottom of the flange nut under
the solar panel and align it .
4. Remove the top saddle mounting brackets
from both ends of the enclosures
5. Attach Modem Enclosure to post and
tighten bottom saddle mounting bracket.
6. Tighten the spacers and nuts on mounting
saddles.
