AutoDialer
PRODUCT MANUAL
Item # 3419
Page 1: ...AutoDialer PRODUCT MANUAL Item 3419 ...
Page 2: ...atchDog and 3672 Alarm Output Module Using Your AutoDialer 1 Program the AutoDialer message and number s per the instructions included with the unit 2 Program the AutoDialer to normally open NO and momentary activation no exit or entry delay per the in structions on pg 11 of your AutoDialer manual 3 Trim or cut off the U shaped terminals on the 4 wire leads on the AutoDialer power alarm cable so t...
Page 3: ...ped ance You can test impedance using a volt meter with imped ance capability If in doubt test your application first When using rainfall as an alarm actuation in SpecWare be aware that the relay will not activate deactivate unless the amount of rain that falls during the logging interval exceeds the set point The set point seen in the SpecWare launch options screen may change slightly to ensure f...
Page 4: ...e lightning negligence accident or unauthorized modifications or to incidental or conse quential damages beyond the Spectrum product Before returning a failed unit you must obtain a Returned Materials Authorization RMA from Spectrum Spectrum is not responsible for any pack age that is returned without a valid RMA number or for the loss of the package by any shipping company 12360 S Industrial Dr E...
