background image

X 2

0191559R1 Page 9 of 9

 

© 2019 Spectrum Industries Inc., All rights reserved.

925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729  /  800-235-1262  /  715-723-6750  /  WWW.SPECTRUMFURNITURE.COM

Device Module Bar Kit - 95011

•  For mounting modules into select carts

•  (2) bar assemblies included

•  Shipping weight: 1 lb [.45 kg]

Divider Tabs - 55530LB

•  For use with universal trays only

•  Provides semi-permanent areas for robots on 

the universal tray

•  Provides charge cord management

•  20ga steel

•  (20) divider tabs included in two bar assemblies

•  Light blue powdercoat

•  Unit weight: .8 oz [23g]

•  Shipping weight: 16 oz [454g]

Splitter - 55531

•  Allows two USB chargers to be powered from a single cord

•  (1) C8 male to (2) C7 female

•  Length: 12” [30 cm]

•  Unit weight: 12.8 oz [362g]

•  Shipping weight: 16 oz [454g]

USB charger 6-port - 55522

•  For charging robots

•  Mounts under tray or on shelf

•  6 USB ports (up to 2.4A per port)

•  60W, 12A max

•  5’ detachable power cord

•  UL-certified

•  3.9” [99mm] x 2.8” [70mm] x 1” [26mm]

•  Unit weight: 6.7 oz [190g]

•  Shipping weight: 16 oz [454g]

USB charger 10-port - 55529

•  For charging robots

•  Mounts under tray or on shelf

•  10 USB ports (up to 2.4A per port)

•  60W, 12A max

•  5’ detachable power cord

•  4.4” [112mm] x 2.7” [68mm] x 1.1” [27mm]

•  Unit weight: 7.7 oz [218g]

•  Shipping weight: 16 oz [454g]

For charging only-no data

For charging only-no data

See 

spectrumfurniture.com

 for the latest

accessories and detailed warranty information.

Summary of Contents for S3 Coding Module 55527H0










Reviews: