Spectrum Industries Liberty ADA 38792 Owner'S Manual Download Page 6

Reset Procedure:

1.  Unplug, then re-plug-in the power cord into a wall outlet or power strip.
2.  Make sure all lift mechanism wire connections are in place and secure.    
3.  Press and hold the “down” button until the monitor column has bottomed-out for 10 seconds.
4. Release, then press and hold the “Down” button again for another 10 seconds.
5.  Release the “down” button.

A. Plug in the power cord.  Route cord so it is not a tripping hazard.
B. To adjust the desk height, press the "Up" or "Down" arrow keys until the preferred height is achieved.  

Figure 5

.

C. Numbers "1, 2, & 3" are memory settings.  After a preferred height is reached, the height setting can be saved by pressing "S" and then

number "1, 2, or 3."  To adjust from one memory setting to another, press and hold the number until the pre-programmed height
is attained.

1

2

3

S

Figure 5

Control Panel

5. Control Panel Operation, Memory Presets, & Reset Procedure

CAUTION

Use caution when raising or lowering the worksurface.  

Do not

sit at, under, or on the worksurface when operating the lift 
mechanism and be sure desk movement does not interfere with 
objects or people.  Keep clear of pinch points during 
worksurface movement.  The lift actuators are rated at a 
maximum capacity of 180 lbs.

Note:

Occasionally it may be necessary to reset the 

lift mechanism.  This should be performed if the 
lectern does not extend or retract.

055311R5 Page 6 of 7

The lift mechanism has now been reset and normal operation can resume.

Flat Panel Monitor Arm

95512 (for monitors weighing 4-11.5 lbs)

95522 (for monitors weighing 10-27.5 lbs)

95509 (for monitors weighing 14-31 lbs)

Evo Flat Panel Monitor Arm

95523 (for 15"-19" monitors weighing 6-13 lbs)

95524 (for 19"-21" monitors weighing 13-21 lbs)

6-Outlet Power Strip

w/ 12' cord

11

5

/

16

"W x 1

1

/

16

"D x 1

3

/

16

"H

99023

7-Outlet Power Strip, insured

w/surge protector, bracket, and 12' cord

10"W x 2"D x 1

1

/

8

"H

99024

Note:

Monitor arms can be mounted to 

the worksurface with a 

3

/

8

" mounting 

hole or clamped to the edge.

Liberty ADA Desk Options

055311R5 Page 6 of 7

Summary of Contents for Liberty ADA 38792








Reviews: