0118729 Page 6 of 8
3. Flip Table upright
1.
Carefully flip the table upright-this will take 3-4 people.
Figure 3
.
Figure 3
CAUTION
Do not allow the legs to contact the floor until
the table is completely rotated. Side-loading
of the table legs could cause damage.
5. Wiring
1. If your worksurface has optional power module or device cutouts, install
the devices, then route and secure the cords using the wiring channel
underneath.
Figure 4
.
4. Display Stand
1. If you have the optional display stand, proceed with the installation at
this time.
Figure 4
. (Instructions included with stand.)
Figure 4
Optional
Power
module
Wiring
channel
Display
Stand
