Power drawer setup
1. Open the front door and pull out the power drawer.
Figure 4A
.
2. Mount the 2 power strips to the drawer with Velcro.
Note: The left and right sides of the drawer
Figure 4B
are most
commonly used, but the front and back sides
Figure 4C
, or bottom of
drawer (not shown) can be used based on the type of chargers and
devices that are stored.
3. Route the power strip cords through the drawer and side panel
grommet holes and plug into the wall outlet.
Figure 4B
Figure 4C
Power strip mounting options
Power
drawer
Power
drawer
Power
strips
Power
strip
Power
strip
Figure 4A
Note: Power strips are
only included with 55431.
0116418R2 Page 5 of 10
