Assembly Instructions:
36 - 72 EVOLUTION D
ESK
SMALL PA RTS LIST
TOOLS REQUIRED F O R A S S E M B LY:
#2 phillips screwdriver
1
ATTACHING LEGS TO W O R K S U R-
FA C E
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding damages or if you have any questions, please call 1-800-235-
1/4-20 X 1-3/4”
Pan Head Machine Screw
(4) #041289 (Silver)
1/4-20 x 2”
Flat Head Machine Screw
(2) #043771
(3) for 48”,60” & 72”
Desks
Glide Wrench
(1) #025069
Glide
5/16-18 x 1-5/8”
(4) #025068
Chair Rail Bracket
(1) #051024P
for 48”60 & 72” Only
Dual Unit-to-unit
Bracket
(1) 036281
Page 1 of 2 052519QR1
1/4-20 X 5/8”
Pan Head Machine Screw
(10) #026064 (Black)
(12) for 48”,60” & 72”
Desks
(per desk)
1600 Johnson St. P.O. Box 400 Chippewa Falls, WI 54729 Ph. 1-800-235-1262 Fax. 1-800-335-0473
email [email protected] www.spectrumfurniture.com
A: Position legs, attach with
4 of the
1-3/4” silver screws
(do not tighten screws
completely at this point).
See Figure 1.
For 48”,60” & 72” desks only...
B: Attach chair rail bracket
with 2 of the
5/8” screws
(Tighten these screws).
FIGURE 1
This end of leg has
a connector inside.
Flip Top Section
Rear Unit to
Unit
Bracket
(1) #052463
Chair Rail Bracket for
48”, 60”,& 72” Desks
1/4-20 x 1-3/4” Screws
1/4-20 x 1-3/4” Screws
1/4-20 x 5/8” Screws
