0193702 Page 3 of 6
Attach top and base panels
1. Align the tabs of the side panels with the top and base panel slots.
3
Base panel ‘D’
Top panel ‘A
’
2. Push the panels down to lock tabs into place. Make sure all panels
are aligned.
3. Install the remaining (2) 8-32 x 1/2” PH Thrd ctg screws in each
corner bracket but do not tighten completely.
Secure panels
1. Carefully tip the locker assembly upright.
2. Install (4) 1/4-20 x 1/2” PHM screws at the rear panel
to secure the assembly.
3. Securely tighten ALL screws at this point.
4
(4) 1/4-20 x 1/2”
PHMS
Attach door assembly
1. Open the hinge and attach the door assembly to the left
panel edge with (4) 8-32 x 1/2” PH Thrd ctg screws.
2. Tighten screws securely.
5
Door assembly
Rear panel
(4) 8-32 x 1/2”
PH Thrd ctg screw
8-32 x 1/2” PH
Thrd ctg screw
(2 per)
Right side panel ‘B’
Left side panel ‘B’
