0191814R2 Page 3 of 4
CORE Lectern (55550) installation:
CORE Lectern (55550) installation:
Side panel
(Right side panel shown)
Tip: Masking tape can be
used on the laminate-side
to minimize chip-out.
1. Determine which panel the shelf will be mounted (left or right side)
2. Locate the (8) starter holes in the back of the side panel.
3. Using a drill with a 3/16” drill bit, slowly drill completely through the
panel at the (8) hole locations.
4. Continue with side panel attachment below.
The (8) starter holes on the back of the laminate side
panel need to be drilled through before installing.
Drill with
3/16” drill bit
2
3
1/8”
Side panel
1
Side panel
Drill laminate side panel(s) for flip-up shelf
X12
X8
X4
#14 x 3/4”
PHSM
3/16
”
X2
#14 x 3/4” PHSM
1. Insert installed panel screws into the keyholes
and push side panel onto CORE.
2. Secure side panel to CORE with (6) #14 x 3/4”
PHSM screws (installed from inside).
CORE Lectern
