2
1
Attach LED light bracket
2
Apply LED tape to bracket
3
Connect LED components
0192185R1 Page 2 of 2
© 2022 Spectrum Industries Inc., All rights reserved.
1500 RIVER STREET, PO BOX 400, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
1. Attach the LED light bracket centered under the
worksurface with (2) #14 x 3/4” PHSM screws.
Figure 1
.
1. Connect the components under the worksurface as shown while
routing them through the desk cord channel.
Figure 3.
(Note plus connector and LED tape will not go in the cord channel.)
Worksurface
Figure 2
LED light
bracket
#14 x 3/4” PHSM
(2 required)
Figure 1
12” LED
tape strip
4” LED
light tape
Connectors
toward cord
channel
LED light
bracket
Cord channel
Figure 3
4-pin connector
4” LED tape
4” LED tape
Plus connector
LED Controller
(connect to power
strip or wall outlet)
6” Driver
adapter
12” RGB
F-to-M link
72” interconnection cable
to plus connector on next desk
LED light
bracket
6” Interconnection cable
Cord channel
1. Apply the 12” LED tape strip to the bracket flanges with the
connectors pointing toward the cord channel.
Figure 2
.
12V Power supply
