Spectrum Digital XEVM642 4VSX35, Technical Reference

Page: 13 / 48

Spectrum Digital, Inc
2-3
2.2 Installing the XEVM642 4VSX35 Daughter Card
This section contains the steps for installing the XEVM642 4VSX35 Daughter Card
on the EVM DM642.
This section makes the assumption that the EVM DM642, Code Composer Studio, and
the correct emulation drivers have been installed and that the DSP debug tool chain is
operating correctly.
For more information regarding the DM642 EVM refer to the following support web
page:
http://c6000.spectrumdigital.com/evmdm642/
To install the XEVM642 4VSX35 Daughter Card onto the EVM DM642 execute the
following checklist:
❏
Make sure the power to the EVM DM642 card is OFF.
❏
Make sure the power to the XEVM642 4VSX35 Daughter Card is OFF.
❏
Install the Xilinx FPGA development software on your PC or laptop computer.
❏
Mount the XEVM642 4VSX35 Daughter Card on the EVM DM642. This is shown in
figure below.
Do not connect or disconnect the 14-pin cable while the target system is powered up.
Target Cable Connectors:
Be very careful with the target cable connectors. connect them gently; don’t force
them into position, or you may damage the connectors.
WARNING !