Spectrum Digital, Inc
1-2
XDS510PP MPSD Emulator Pod Installation Guide
1.1 What You’ll Need
The following checklists detail items that are shipped with the XDS510PP
MPSD emulator and additional items you’ll need to use these tools.
Hardware checklist
__ host
An IBM PC/AT or compatible ISA/EISA-based PC with a hard-
disk system and a 1.44M floppy-disk drive
__ memory
Minimum of 640K; in addition, if you are running under Microsoft
Windows, you’ll need at least 256K of extended memory
__ display
Monochrome or color (color recommended)
__ parallel port
One
centronics printer port, bidirectional for 4 bit, 8 bit, or EPP
compatible,
__ emulator module
5 Volts DC (125 milliamps)
power requirements
__ target system
A board with an appropriate target device
__ connector to
12-pin connector (two rows of six pins) --- see Chapter 2 for
target system
more information about this connector
__ optional hardware A Microsoft-compatible mouse
An EGA or VGA compatible graphics display card and a large monitor.
The debugger has several options that allow you to change the overall
size of the debugger display. If you have an EGA or VGA compatible
graphics card, you can take advantage of some of these larger screen
sizes. These larger screen sizes are most effective when used with a
large (17” or 19”) monitor. (To use a larger screen size, you must
invoke the debugger with an appropriate option. For more information
about options, refer to the invocation section in Chapter 1, Overview
of a Code Development and Debugging System, in the TMS32OC5x
C Source Debugger User’s Guide.)
__ miscellaneous
Blank, formatted disks
materials
25 Conductor Printer Cable
Software checklist
__ operating system Micrsoft Windows 3.1 or Windows 95
__ required file
emurst.exe resets the XDS510PP emulator pod
