3
QZ-Series
UV-A Magnifier Lamps
UNPACKING AND INSPECTION
1. Carefully unpack and inspect the lamp for possible damage in shipment. If any
damage is noted, immediately notify the carrier and supplier before attempting
to use the lamp.
2. Save the shipping carton and packing materials for future storing and shipping
of the lamp.
3. Check the lamp’s electrical performance as soon as possible according to the
GENERAL FUNCTIONAL CHECKS outlined below.
GENERAL FUNCTIONAL CHECKS
1. Connect the plug to a power outlet that complies with the electrical
requirements specified on the lamp’s label.
2. The power supply cord is the disconnect for this unit.
3. Press the switch to the “
I
” position to operate the UV-A long wave tubes. Press
the switch to the “
II
” position to operate the white lights. The “
O
” position turns
the lamp off.
4. The tubes should become energized and emit a steady glow of light. The light
may initially flicker, especially if the lamp is cold, but should stabilize after a
few seconds.
DANGER
Ultraviolet radiation emitted from this product. Avoid exposure.
ALWAYS WEAR PROTECTIVE CLOTHING. EXPOSURE MAY CAUSE
PREMATURE AGING OF THE SKIN AND CANCER. ALWAYS WEAR
PROTECTIVE EYEWEAR; FAILURE TO DO SO MAY RESULT IN
SEVERE BURNS OR LONG TERM INJURY TO EYE. Never look directly
into the lamp. Exposure can cause eye and skin allergy and allergic
reactions. Medications or cosmetics may increase your sensitivity to
ultraviolet radiation. Consult physician before operating this product if
you are using medications or have a history of skin problems or
believe yourself especially sensitive to sunlight.
FOR LABORATORY USE ONLY
WARNING
Please read the instructions for this lamp carefully before using it.
Never use this lamp in any manner not specified in these instructions.
Do not use if a tube, cord or plug is not fully serviceable. We
recommend using Spectroline
®
UV-absorbing protective eye and face
wear. See Replacement Parts and Accessories for model numbers.
This eye and face wear also improves contrast between the fluorescent
area and the background and eliminates "blue haze" interference.
