9
8
LANGUAGE
ENGLISH
LANGUAGE
SPANISH
LANGUAGE
FRENCH
LANGUAGE
GERMAN
The AccuMAX is immediately operational with
software-driven, established default parameters.
However, you may choose to customize some of its
features. A quick run-through of the various options may
be of value in your operating conditions.
press EXIT to set and use the language. The unit will
default to UNITS and LANGUAGE and will remain in
that language until you set it to another language.
Press UP to return to the left column, press DOWN
until you reach EXIT, press ENTER and return to
OPERATION and SETTINGS.
When it reaches the language you want to use,
Two words will appear on the screen.
Each time you press UP or DOWN the name of the
language will change.
Press DOWN to access SETTINGS, then ENTER to
access the next screen, which defaults to UNITS and
LANGUAGE.
Press UP to access LANGUAGE, then press
ENTER.
6.3 CHOOSING AN OPERATING LANGUAGE
The AccuMAX is equipped to operate in four languages:
English, French, German and Spanish. To access and
use each language, when the meter is turned on and
opens in the screen pictured above, press MAIN to
access the OPERATION/SETTINGS screen,
and automatically proceed to the next screen.
and will automatically shut off in 30 seconds. This
same message is displayed if the detector is
removed while the instrument is running. To remedy
this situation, simply turn off the AccuMAX, plug in
the detector, and turn the unit on. The instrument will
then initialize itself automatically.
6.2 DETECTOR ATTACHED
After the sensor detector is attached and the
AccuMAX is turned on, the screen will display
A detector must be plugged in when the AccuMAX is
first turned on for the instrument to initialize properly
and communicate with the detector for information on
calibration factors, range limitations and units. If the
instrument is turned on without a detector plugged
in, the display will show
6. USING THE AccuMAX
6.1 ON/OFF
Press and hold the ON/OFF button to turn the meter
on. Splash screen below will be displayed.
CHOOSING AN OPERATING LANGUAGE
•
The AccuMAX is equipped to operate in four languages: English, French, German and Spanish. To access and
choose each language, when the meter is turned on and opens in the screen pictured above, press
MAIN
to
access the
OPERATION/SETTINGS
screen.
•
Press
DOWN
to access
SETTINGS
, then
ENTER
to access the next screen, which defaults to
UNITS
and
LANGUAGE
.
•
Press
UP
to access the word
LANGUAGE
, then press
ENTER
.
•
Two words appear on the screen. Each time you press
UP
or
DOWN
, the name of the language will change.
When it reaches the language you want to use, press
EXIT
to set and use the language. The language will
remain in use until you set it to another language.
•
To change meter display settings, press
MAIN
to select
OPERATION
, then press
DOWN
to select
SETTINGS
option (see SETTINGS section).
•
For light level reading, press
UP
to select
OPERATION
, then press
ENTER
.
•
Shine light directly over sensor of interest (UV or VIS) on dual detector. Meter instantly displays light level for each
wavelength (intensity/unit area).
•
Access higher level operations such as autozeroing and integration through menu-driven functions (see
individual sections for details).
•
To turn off meter, press and hold
ON/OFF
button. Displays
Shutting Down -NOW-
then goes to blank screen.
•
Meter will automatically shut off after 60 minutes of inactivity except in integration (
INTG
) mode. Unless the meter
is at low battery status, all user-selectable parameters will have been saved and used for future meter operations.
Press and hold
ON/OFF
button to restart meter.
Detected sensor wavelengths
Operation mode
Data type
Available menu-driven operations,
correspond to keypad buttons
Battery power
bars
UV-A reading
Visible reading
ABSOLUTE / NORMAL MODE DISPLAY
5. OPERATION––QUICK GUIDE
•
TO TURN ON METER
, press and hold
ON/OFF
button for two seconds.
•
Displays
Spectroline
®
AccuMAX™ Series
splash screen.
•
Displays
Establishing Sensor Communications
when sensor detector is attached.
•
Displays
Detector Not Found/Try Cycling Power
ONLY
if sensor detector is
NOT
connected or detector was
disconnected during operation. Reestablishing connection will shut off meter.
•
TO RESTART METER
, press and hold
ON/OFF
button.
•
Meter automatically opens in
ABSOLUTE DATA/NORMAL MODE DISPLAY
(see screen below) ready for
operation.
