manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 58

Software Update

Chapter 3

 :  Display

MiniCapt® Mobile Operations Manual

3-9

Software Update

The 

About

 screen displays the software version currently installed (see 

About Screen 

on page 3-14).

>> To update software in the MiniCapt Mobile Microbial Air Sampler:

1.

Prepare an external USB drive with the software program on it.

2.

Insert the external USB drive into the USB port on the front of the MiniCapt base 
(see 

Figure 3-9

).

Figure 3-9  

USB port on the front of the MiniCapt base

3.

On the 

Home

 screen, press 

 

the 

Features Menu 

button (see 

Figure 3-10

).

The 

Features Menu 

screen appears (see 

Figure 3-11

 on page 3-10).

Figure 3-10  Home

 screen

TIP: 

To view the 

Home

 screen, touch 

 the 

Home

 button.

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands