manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 137

13-4

 

MiniCapt® Mobile Operations Manual

Chapter 13

 :  Export

Export Data from the MiniCapt

Export Data from the MiniCapt

>> To export data from the MiniCapt:

1.

Insert an external USB drive into the USB port on the front of the MiniCapt base 
(see 

Figure 13-5

).

Figure 13-5  

USB port on the front of the MiniCapt base

2.

Open the 

Export 

screen as described in 

View the Export Screen 

on page 13-1.

3.

Touch the check box(es) for the type(s) of data you want to export so that the 

check box is checked 

:

•

 

Clone Entire Device (all 3 below)

•

 

User and Access Details

•

 

Locations

•

 

Recipes

Figure 13-6  Export 

screen

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands