manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 128

Import Data into the MiniCapt

Chapter 11

 :  Import

MiniCapt® Mobile Operations Manual

11-5

6.

Touch the file you want to import to select it (see 

Figure 11-7

).

The file you selected appears in the 

FILENAME

 field in the 

USB FLASH DRIVE 

‘Hard Disk’

 screen.

7.

Touch 

 the 

Import File 

button on the 

USB FLASH DRIVE ‘Hard Disk’

 

screen (see 

Figure 11-7

).

•

The file you selected is copied from the external USB drive to the 
MiniCapt.

•

The 

Import successful

 message appears (see 

Figure 11-8

).

Figure 11-8  Import successful

 message screen.

8.

Touch 

 the GREEN checkmark button in the 

Import successful

 

message screen.

The 

Setup Submenu 

screen displays.

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands