manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 105

8-6

 

MiniCapt® Mobile Operations Manual

Chapter 8

 :  Warnings and Alarms Setup

Alarm Comments

Alarm Comments

You can pre-program up to 20 different comments that describe alarm conditions. 
Comment definitions display in the 

Comment

 dropdown list of the 

Home

 screen. 

Then, if an alarm occurs during a sampling run, you must select the comment that 
applies so that the comment for the alarm related to the event is saved with the record 
for the sampling run.

>> To view the Alarm Comments screen:

1.

On the 

Home

 screen, touch 

 

the 

Features Menu 

button (see 

Figure 

8-10

).

The 

Features Menu 

screen appears (see 

Figure 8-11

).

Figure 8-10  Home

 screen

Figure 8-11  Features Menu 

screen

2.

Touch 

 the 

Setup

 button on the 

Features Menu 

screen.

The 

Setup Submenu 

screen displays (see 

Figure 8-12

 on page 8-7).

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands