Page 2-2
Airnet II Particle Sensor Operations Manual
Chapter 2
Unpacking and Installation
Shipping List
Airnet II 301, 501, 501A, 510, and 510 XR
(Polycarbonate enclosure version):
Airnet II 510s, and 510s XR
(Stainless steel enclosure version):
Table 2-1
Airnet II Particle Sensor Shipping List (Polycarbonate)
Part Name
Quantity
Isokinetic air sampler (probe)
1
“L” Type mounting bracket (or one of three alternate brackets
a
)
a. You must order alternate brackets in advance.
1
Phone jack cable, RS-232
b
b. Used only for configuring the Airnet II particle sensor.
1
Operations manual
c
c. For large orders with multiple units, Particle Measuring Systems may elect to limit
the number of Operations Manuals included in the shipment.
1
Universal AC to DC power supply 100 –240 VAC, 50/60 Hz
(Optional)
1
Power connectors and Molex pins
Molex 6-pin square receptacle
1
Molex crimp pins, female (6)
6
4-20 mA output connectors
(Optional)
Molex Micro Fit 3.0 6-pin square receptacle (optional)
1
Molex crimp pins, female (6) (optional)
6
Table 2-2
Airnet II Particle Sensor Shipping List (Stainless Steel)
Part Name
Quantity
Isokinetic air sampler (probe)
1
“L” Type mounting wall bracket
1
Phone jack cable, RS-232
a
a. Used only for configuring the Airnet II particle sensor.
1
Operations manual
b
b. For large orders with multiple units, Particle Measuring Systems may elect to limit
the number of Operations Manuals included in the shipment.
1
