12
S2/S9
Screwing in the knuckle eye:
•
Turn the lock nut back as far as the eye
•
Screw the knuckle eye into the transducer
•
Unscrew the knuckle eye one or two turns and align
•
Load eye to nominal load
•
Tighten the lock nut
ATTENTION
When tightening the lock nut, the torque must on no account be
transmitted through the transducer.
5.3.2 Installation using one knuckle eye
Customer side
Hmax/Hmin
approx. 87
M
B
13Nm
max. thread re-
ach
at 0.5 – 20kN:
Middle hole
F
F
S2
S9
Rigid force outlet
Fig. 5.2:
Installation for compressive and tensile loading
ATTENTION
The cable-mounting side of the transducer should always be
connected directly to the rigid force outlet sections customer-side.
When doing so, make sure as far as possible that the position of
the cable causes no force leakage (for instance due to its weight
or stiffness).
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
