Brüel & Kjaer Vibro ● 10/2019 ● C104646.001 / V06 ●
Seite 17 von 24
Technischen Änderungen vorbehalten!
Brüel & Kjaer Vibro
│
Instruction AS-247
Installation and Assembly
EN
Figure 4-2)
Assembly drawing
1.
Align the sensor in the measurement plane, so that the sensor's measurement axes, labelled
X and Y, fit the application context.
2.
First, mark the positions of the two holes.
3.
Drill two mounting holes, each with an M6 threaded hole and a depth of at least 12 mm (see
4.
Screw in and secure both M6 stainless steel screws (protection class 70) into the mounting
surface (with e.g. Loctite 243 medium strength, Loctite 270 high strength). Tighten the screws,
alternating between the screws. We recommend a tightening torque of 4 Nm (max. 6 Nm) for
both screws.
