Page 24 of 32
©
Brüel & Kjaer Vibro
●
08/2020
●
C105519.001/v03
Technical alterations reserved!
EN
Marking of lines
It is very important to mark the line from the point of measurement to the connection of the electronic
super-vision system. It is indispensable for documentation, initiation and for the service departments
and has to be done by the customer.
4.6.1 Connection
Figure 4-6)
Connection 8315
5 Maintenance and repair
All sensors of the 8315 series are maintenance-free.
Never open a defective sensor! It has to be replaced in case of damage. Should a defect occur
at the power supply lead, the sensor has to be replaced immediately.
6 Disposal
After use, dispose of the systems, cables and sensors in an
environmentally friendly manner, in accordance with the applicable
national provisions.
WEEE-Reg.-No. DE 69572330