background image

 

 

Legal Notice 

The SPECTREX End-of-Line Encapsulated Resistor described in this document is the property of 
Rosemount. 

No part of the hardware, software or documentation may be reproduced, transmitted, transcribed, 
stored in a retrieval system or translated into any language or computer language, in any form or by any 
means, without prior written permission of Rosemount. 

While great efforts have been made to assure the accuracy and clarity of this document, Rosemount 
assumes no liability resulting from any omissions in this document, or from misuse of the information 
obtained herein. The information in this document has been carefully checked and is believed to be 
entirely reliable with all of the necessary information included. Rosemount reserves the right to make 
changes to any products described herein to improve reliability, function, or design, and reserves the 
right to revise this document and make changes from time to time in content hereof with no obligation 
to notify any persons of revisions or changes. Rosemount does not assume any liability arising out of the 
application or any use of any product or circuit described herein; neither does it convey license under its 
patent rights or the rights of others. 

 

 

Warning: This manual should be read carefully by all individuals 
who have or will have responsibility for using, maintaining or 
servicing the product. 
The detector is not field-repairable due to the meticulous 
alignment and calibration of the sensors and the respective 
circuits. Do not attempt to modify or repair the internal circuits 
or change their settings, as this will impair the system's 

performance and void the SPECTREX product warranty. 

Warranty 

SPECTREX agrees to extend to Purchaser/Distributor a warranty on the SPECTREX supplied components 
of the SharpEye products. SPECTREX warrants to Purchaser/Distributor that the products are free from 
defects in materials and workmanship for a period of five (5) years, commencing with the date of 
delivery to Purchaser/Distributor. SPECTREX expressly excludes damage incurred in transit from the 
factory or other damage due to abuse, misuse, improper installation, or lack of maintenance or “Act of 
God,” which are above and beyond its control. SPECTREX will, upon receipt of any defective product, 
transportation prepaid, repair or replace it at its sole discretion, if found to have been defective when 
shipped. Said repair or replacement is SPECTREX’S sole liability under this warranty and SPECTREX’S 
liability shall be limited to repair or replacement of the component found defective and shall not include 
any liability for consequential or other damages. The customer is responsible for all freight charges and 
taxes due on shipments both ways. This warranty is exclusive of all other warranties express or implied. 

 

Summary of Contents for SharpEye 777915 Series













Reviews: