Spectrex SharpEye 777670 Installation Instructions Manual Download Page 3

 

iii

 

 

Legal Notice 

The SharpEye Optical Flame Detector described in this document is the property of 
Spectrex, Inc. 

No part of the hardware, software or documentation may be reproduced, transmitted, 
transcribed, stored in a retrieval system or translated into any language or computer 
language, in any form or by any means, without prior written permission of Spectrex, Inc. 

While great efforts have been made to assure the accuracy and clarity of this document, 
Spectrex, Inc. assumes no liability resulting from any omissions in this document, or from 
misuse of the information obtained herein. The information in this document has been 
carefully checked and is believed to be entirely reliable with all of the necessary information 
included. Spectrex Inc. reserves the right to make changes to any products described 
herein to improve reliability, function, or design, and reserves the right to revise this 
document and make changes from time to time in content hereof with no obligation to 
notify any persons of revisions or changes. Spectrex, Inc. does not assume any liability 
arising out of the application or any use of any product or circuit described herein; neither 
does it convey license under its patent rights or the rights of others 

 

 

Warning: This manual should be read carefully by all 

individuals who have or will have responsibility for using, 
maintaining or servicing the product. 
The Detector is not field-repairable due to the meticulous 
alignment and calibration of the sensors and the respective 

circuits. Do not attempt to modify or repair the internal 
circuits or change their settings, as this will impair the 

system's performance and void the Spectrex, Inc. Product 
warranty. 

Warranty 

SPECTREX INC. Agrees to extend to Purchaser/Distributor a warranty on the SPECTREX 
supplied components of the SharpEye products. SPECTREX warrants to 
Purchaser/Distributor that the products are free from defects in materials and workmanship 
for a period of five (5) years, commencing with the date of delivery to 
Purchaser/Distributor. SPECTREX expressly excludes damage incurred in transit from the 
factory or other damage due to abuse, misuse, improper installation, or lack of 
maintenance or “Act of God” which are above and beyond its control. SPECTREX will, upon 
receipt of any defective product, transportation prepaid, repair or replace it at its sole 
discretion if found to have been defective when shipped. Said repair or replacement is 
SPECTREX’S sole liability under this warranty and SPECTREX’S liability shall be limited to 
repair or replacement of the component found defective and shall not include any liability 
for consequential or other damages. The customer is responsible for all freight charges and 
taxes due on shipments both ways. This warranty is exclusive of all other warranties 
express or implied.

Summary of Contents for SharpEye 777670











Reviews: