Product Overview
TM40/40U Rev. (Af), February 2019
21
The accessories, tilt mount P/N 40/40-001, weather cover P/N 777163 and P/N
777268, duct mount P/N 777670, and air shield P/N 777650 are included in the
approval.
This product is suitable for use in hazardous Zones 1 and 2 with IIC gas group
vapors present, and Zones 21 and 22 with IIIC dust type present.
2.4.5.2
FM, CSA
The 40/40U and UB Optical Flame Detector is certified for FM and CSA Explosion
Proof and Functionality per FM3260:
•
Class I, Division 1, Groups B, C, and D.
•
Dust Ignition Proof
–
Class II/III Division 1, Groups E, F and G.
•
Ingress Protection
–
IP67, IP66, NEMA 250 Type 6P.
•
For more details see
FM Report Project ID3029553
, and
CSA Report No.
2451134
.
2.4.5.3
SIL-2 (TÜV) (Model 40/40UB only)
The 40/40UB Optical Flame Detector is certified for the SIL-2 requirement per
IEC 61508.4, Chapter 3.5.12.
The alert condition according to SIL-2 can be implemented by:
•
Alert signal via 0
–
20mA current loop.
Or
•
Alert signal via alarm relay and fault relay
•
For more details and guidelines for configuring, installing, operating, and
service, see
on page 79 and
TÜV Report No. 968/EZ - 348
.
2.4.5.4
EN54-10
The 40/40U and UB Flame Detector is certified to EN54-10 and CPD.
•
The detector has been tested and approved per EN54-10 by VdS.
•
This test includes a functional test, environmental test, EMI/EMC test, and
software check.
•
For more details see VdS Reports Numbers BMA 12119 and BMA 12120.
2.4.5.5
Inmetro (UL)
The 40/40U and UB Flame Detectors are in compliance with the standards ABNT
NBR IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-7, ABNT NBR
IEC 60079-18, ABNT NBR IEC 60079-31, and INMETRO decree No. 179 as of May
18th, 2010. Further details may be found on Certificate of Compliance No. UL-BR
16.065XX.
2.4.5.6
TR CU/EAC
The 40/40U, UB Flame Detectors are in compliance with the standard TR CU
012/2011 per:
1 Ex db eb op is IIC T4 Gb X
