Spectrex SharpEye 40/40C Series, Reference Manual

Page: 22 / 50

Procedure
1. Place the protective cover on top of the detector.
2. Secure the protective cover by tightening the screw.
Note
When installing the stainless steel protective cover, the same installation
instructions apply.
2.7 Aim the detector
Aim the detector toward the center of the detection zone and make sure you have a
completely unobstructed view of the protected area.
Emerson recommends positioning the detector tilted down at a 45° angle to maximize
coverage and prevent accumulation of dust and dirt.
Do not begin installation until all conceivable considerations regarding detection location
have been taken into account.
2.8 Changing default detector settings
The Main settings that can be modified using the Modbus
®
Manager or HART
®
communication include:
• Sensitivity
• Response time
• Heated optics functionality
• Alarm delay
• Accessory relay options
Installation Reference Manual
December 2021 00909-0100-4975
22 Spectrex.net