Installing WinHost Software
TM888050 Rev. (Da), October 2017
21
5.1.4
Detector Channel Information
Table 4 describes the detector data channels information:
Table 4: Detector Channels Description
Channel
Description
Signal
Voltage signal after electronic amplification
(depends on gain).
Reference
Voltage reference after electronic amplification
(depends on gain).
Ratio
Ratio between signal and reference.
NQ Ratio
Normalized ratio equals 1 when no gas is present.
Temperature
Temperature inside the detector in °C.
Voltage
VIN measurement.
LEL x m
Actual gas reading of detector.
Log rec num
The detector’s available log records.
5.2
Setup Table Window
The setup table window allows the user to view and program the various detector
functions. Figure 7 show the setup table window.
