background image

SpectraPure

SpectraPure®Inc.

  

480.894.5437   Call us toll-free  1.800.685.2783    

2167 East Fifth St,    Tempe, Arizona   85281

®

2

No part of this publication may be reproduced, stored in a retrieval system, or transmitted 
in any form or by any means, electronic, mechanical, photocopying, recording or otherwise 
without the prior written permission of SpectraPure Inc.

Table of Contents

........................................................................................................................2

Warranty Information

...............................................................................................................3

Systems Information

System Specifications..........................................................................................................4
System Description..........................................................................................................5-6

Installation

System Initialization.............................................................................................................7
Checking Waste to Product Water Ratio..................................................................8-9
Flow Restrictor Removal, Adjustment and Replacement...............................10-11

Filter Diagnostics

Sediment Filter Diagnostic.............................................................................................12
Carbon Filter Diagnostic.................................................................................................13
Deionization Cartridge Diagnostic..............................................................................14
RO Membrane Diagnostic.......................................................................................15-17

Troubleshooting Guide

Troubleshooting Guide for the System......................................................................18
Troubleshooting the RO Membrane....................................................................19-21
Tips & Storage....................................................................................................................22

Replacement & Optional Parts

............................................................................................24

COPYRIGHT 2002-2009© BY SPECTRAPURE INC

ALL RIGHTS RESERVED

TABLE OF CONTENTS:

Thank You for your purchase of a 

SpectraPure® System. With proper 

installation and maintenance, this system will provide you with high quality 
water for years to come.  All  SpectraPure®  products are rigorously tested 
by  us for safety and reliability. If you have any questions or concerns, please 
contact our customer service department at 1.800.685.2783 or refer to our 
online troubleshooting at www.spectrapure.com.

Summary of Contents for MaxPure MPDI DI System

























Reviews: