SpectraLink Corporation
Installation—NetLink Telephony Gateway
NetLink SVP Server
Part Number: 72-0065-01-G.doc
Page 18
options, etc.) to be programmed. This programming will be done after the wireless
devices are assigned to the NetLink Telephony Gateway, but will be faster if planned in
advance by verifying the parameters and features on the current telephone system and
wired phones.
For more detail, consult the SpectraLink
LinkPlus Digital Interface
document for the type
of telephone system in use at your location.
5.4 Connect Telephone Lines to Demarc Blocks
Telephone cables are punched down onto the cross-connect blocks as shown in the
following demarc block diagrams.
Photocopy the
Wireless Device Planning Worksheets
as needed. Use the forms to track
the telephone line assignments connected to each NetLink Telephony Gateway. As the
installer punches down each telephone connection, record the information on the form to
identify the user and extension assigned. A copy of this form should be posted near the
cross-connect block.
