SpectraLink Corporation
Installation, Configuration, and Administration
NetLink SVP Server (within NetLink Telephony Gateway environments)
PN: 72-0178-02-E.doc
Page 20
4.4
SVP Server Configuration
The
SVP-II Configuration
screen is where you set the mode of the NetLink SVP
Server. It is also where you can lock the NetLink SVP Server for maintenance and
reset the NetLink SVP Server after maintenance. The type of gateway you are using
determines the mode of the NetLink SVP Server.
SVP-II Mode
must be set to
NetLink
for systems using the SpectraLink NetLink Telephony Gateway.
From the main menu, scroll to
SVP-II Configuration
and select by pressing Enter.
The NetLink SVP Server will automatically lock for maintenance if the IP address is
changed. When this Maintenance Lock occurs, the NetLink SVP Server must be
reset upon exit. All active calls are terminated during a reset.
SVP-II Mode
Set to
NetLink
when using a NetLink Telephony Gateway.
Ethernet link
The SVP Server will auto-negotiate unless there is a need to specify a link speed.
System Locked
This option is used to take the system down for maintenance. The default entry
is
N
(No). Set it at
Y
(Yes) to prevent any new calls from starting. Return to
N
to
restore normal operation.
Maintenance Lock
The system automatically sets this option to
Y
(Yes) after certain maintenance
activities that require reset, such as changing the IP address. Maintenance Lock
prevents any new calls from starting. Note that the administrator cannot change
this option. It is automatically set by the system. Reset the system at exit to clear
Maintenance Lock.
