111 Highland Drive
–
Putnam, CT 06260
Phone 860-928-5834
–
Fax 860-928-2676
Replacing the Tungsten-Halogen lamp bulb
1. Turn off all power.
2. Wait until the lamp cools down.
3. Remove 4 faceplate screws.
4. Pull out the light source slider.
5. Remove the top 2 set screws from the bulb holder.
6. With finger cots, remove the (0.35-inch) set screw on the bulb holder.
7. Carefully pull apart the holder into its 3 distinct pieces and replace the bulb.
Sometimes, the bulb may pull the plug with it, so please be careful when handling it. If this
occurs, insert the new bulb into the plug and insert both pieces into the holder.
8. Put pieces back together, in the direction of the reference photo.
9. Insert the set screw on the holder. Tighten firmly.
