Spectral Instruments Series 800, User Manual, Page: 22 / 70

Spectral Instruments
Pt # 2500- 22
2.3 Assembly Of The Camera System
Camera assembly consists of verifying proper AC line voltage setting, connecting AC
line power to the power supply, connecting the power cable between the power supply
and camera, and connecting the computer interface cable between the camera and the
computer interface card.
Figure 6.
S800 Interconnect Diagram
Figure 6. shows how the components connect and how the main power must be
connected.
2.3.1 Assembly Of The Camera
Assembly of the camera involves mounting the head onto a test fixture or onto your
equipment. Normal precautions should be taken against handling damage.
2.3.2 Assembly Of The Camera Power Supply
The AC power setting must be verified or set to the proper configuration before power
is applied to the camera. The power-entry module has a recessed IEC male connector
for the power cord. To the right of this recessed male plug is a fuse module that has an
indicator for the current power configuration. The indicator is a white dot that appears
to the right of one of the four power settings marked in the black plastic on the fuse
holder. The indicator MUST agree with the mains power that will be used. If the
indicator does not show that the camera power supply is set to the proper AC power, it
must be changed. All of the output fuses must also be changed whenever the incoming
power setting is changed from 100/120 to 230/240 volt configurations. The fuse