Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 137 / 378

2.
Establish a connection to the GSG unit by clicking . (For details, see "Connecting Stu
dioView to GSG" on page 116.)
3.
Once a connection has been established, you should see GSG's file/folder tree in the
left window, and StudioView's file list in the right window:
4.
Double-click on any folder to open it. Click on the top folder to navigate to the next
higher folder. Highlight any file in order to F5 Copy or F8 Delete it.
Downloading a File from a GSG Unit via the Web Interface
In order to download a file from a connected GSG unit to a destination of your choice on the
StudioView PC, instead of using the File Manager , you can also use the GSG Web Inter
face :
1.
In StudioView, open the GSG Web Interface by clicking the Globe button (or – if not
using Studioview – see "Accessing the GSG Web Interface" on page 109).
2.
Select GSG FILES in the top-left corner. Then select the observations/ directory. Click on
any file to display its contents. Click the green arrow in the top right corner to navigate
back to the file listing.
3.
Download a file by right-clicking on it and selecting Save target as ...
4.9.7 Accessing GSG Remotely via StudioView
If a PC has been connected to the GSG unit via one of the communication interfaces (Ethernet,
USB, or GPIB, see "Rear Panel" on page 29), the GSG unit can be controlled remotely, either
by using its web interface, or by submitting commands via StudioView's console tool:
Access via the Web User Interface
The StudioView Web User Interface ("Web UI") tool provides web access to the front panel of
your GSG unit.
To open the Web UI in StudioView:
4.9 Studioview Tasks
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
121