Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 130 / 378

Convert trajectories from CSV, KML, KMZ and GPX files to the required NMEA format
Create scenario files (including events and trajectories) without the need to be connected
to a simulator.
4.9.1.1 StudioView Tasks
This Chapter describes some of the tasks you will likely perform with GSG StudioView:
"Installing StudioView" on the facing page
"Connecting StudioView to GSG" on page 116
"Updating the GSG Firmware via StudioView" on page 117
"Accessing GSG Remotely via StudioView" on page 121
"Creating a Trajectory in StudioView" on page 123
"Creating an RSG Trajectory with StudioView" on page 133
"Configuring a Scenario" on page 140
"Playing RSG Scenarios in StudioView" on page 140
"Record and Playback" on page 154
4.9.1.2 StudioView Functionality Overview
File Management and Control
StudioView's File Manager allows you to upload or download scenario files to or from your
GSG unit: Connect your Windows
®
PC running StudioView to the GSG unit via its network,
USB, or GPIB interface. Then drag & drop the files, or use the copy/delete/rename hotkeys on
either the PC or the GSG unit.
The Uploader is designed to batch-upload scenarios, or firmware files – if needed, to several
GSG units simultaneously.
Also included is the Console function which is used to send SCPI commands to a connected
GSG unit, and to view the response.
Note: GSG StudioView requires a license to activate all features after the 30-day
trial period. After the trial period, all features are locked out except for the
Uploader . The Uploader is used to perform firmware updates or upload scenario
files to the GSG.
Trajectory Building and Dynamic Event Management
A key feature of GSG StudioView is the ability to create and modify the simulation of a moving
114
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.9 Studioview Tasks