Spectracom 7535-001, User Manual

Page: 11 / 16

Spectracom Corporation 7535-001
IRIG-B Distribution Amplifier User Manual 2-1
2 Specifications
•
Meets IEEE Standard 1344-1995 for IRIG B
•
1 to 6 volts peak-to-peak output with standard 1 kHz carrier
•
Buffered signals good to minimum of 75 meters
•
Nominal gain of 1.00 ± 0.01
•
Separate channels with 4 buffered outputs each channel
•
Each output short circuit protected- can’t affect other outputs
•
BNC input and output connectors
•
Packaged in 1U 19” rack 1.75” high by 10” deep
•
No fans or cooling slots— closed to the environment
•
115 VAC 60 Hz 16 Watts
2.1.1 Power
The power connector and power switch are on the rear. When power is on and correctly
connected, the power indicator is illuminated. If the indicator is not illuminated,
disconnect the
power , ensure the correct power is available, and check the fuse. Power requirements are:
Input Voltage Frequency Fuse Power
100 – 120 VAC 50 – 60 Hz 0.5 A 250V 15 Watts maximum