Spectra Verde 4U, User Manual, Page: 191 / 244

Appendix B — HotPair Setup and Configuration Configure Network Connections
September 2017 User Guide — Spectra Verde Array
191
3. Select Static as the addressing method and enter the following
information:

IP Address —Enter a valid IPv4 address.

Netmask —Enter the subnet mask.

The Default Gateway and MTU fields cannot be edited. These fields
are automatically configured using the Default Gateway and MTU
values from the private connections you configured on the primary
master node.

The VHID field cannot be edited. This field is automatically
populated with the VHID value you entered on Step 4 on page 190 .
4. Click Save .
Configure the Secondary Master Node - Private Verde
Management Port
1. While still logged in to the primary master node, from the menu bar,
select Configuration > Network , or click the Network pane on the
Dashboard screen. The Network screen displays.
2. In the Network Interfaces pane, select the Private Management
(Standby) row, and then select Action > Edit . The Edit Private
Management (Standby) dialog box displays.
Figure 148 The Edit Private Management (Standby)
dialog box.