Spectra Watermakers CABO 10,000, Installation And Operating Manual

Page: 24 / 25

24
Specifications
Electrical Input
240 volt systems: 208-240 volts single or three phase 50/60 Hz 19.5 amps max**
** includes boost pump
Power consumption will vary depending on feed water conditions and motor RPM. Do
Not Exceed Factory Recommended Max/Min values.**
Feed Water Supply
Minimum Pressure after filters: 10 psi, .7 bar
Maximum Pressure after filters*: 20 psi, 1.4 bar
Flow Rate: 20gpm, 76 L/min.
Total Dissolved solids: 0-45,000 mg/L
pH range: 4-11
Continuous free chlorine: 0 ppm
Temperature: 0° to 45° C
Turbidity: 1 NTU max
Silt Density Index: 1 max (after pre-filtration)
Product
Rejection: 99.5%
Flow: 6.5—7.2 gpm, 24.5—27.25 lpm
Lubricant:
O-rings and seals: Dow Corning Silicon Lubricant
CAT Crankcase: 5W-30 or equivalent synthetic motor oil