8
8-32 x 3/8”
THUMBSCREWS
Turn the instrument upside down, and gently place it on a table near an edge (See Figure 9) in
order to install the Enclosure Rear Panel. Hang about 1 inch of the instrument over the edge.
Figure 9 Instrument Prior To Rear Panel Installation
Place the Rear Panel over the bottom of the instrument, and fasten it to the instrument using
four thumbscrews (See Figure 10 – HR-512i or Figure 11 – HR-1024i). Also connect the
Interconnect Cable to the mate on the instrument’s Optical Plate.
Figure 10 HR-512i Instrument After Rear Panel Installation
INTERCONNECT
CABLE PLUGS
INTO OPTICAL
PLATE
Summary of Contents for i Series
Page 2: ......
