English
16
On the flowchart, each step is identified by a particular combination of LED states.
Whatever the step, normal operating mode is restored after 10 seconds of user
inactivity.
NOTE: Other actions are possible from the control panel. See
Restoring Factory Settings on page 47
Power Up
Normal
Operating Mode
Set Data
Logging
Set Radio
Press briefly
Press briefly
Press briefly
Press for 2 sec.
Press for 2 sec.
(buzzer then beeps)
Press for 2 sec.
(buzzer then beeps)
Data logging is now on if it
was off, or off if it was on.
Receiver automatically returns
to normal operating mode.
Radio Mode
Radio port now
connected to receiver port A.
Turn off receiver to escape
from this mode.
Conventions used
for LED states:
Off
On (solid color)
Very slow blinking
Slow blinking
Fast blinking
Configuration
Mode
Press briefly
Summary of Contents for SP60 GNSS
Page 1: ...User Guide SP60 GNSS Receiver August 2016 Release...
Page 8: ......
